Baldor CDRX251524T 15HP 3530//2940RPM 3PH 60/50HZ 254TC XPF
- Write a review
$4,695.77
Agency ApprovalsCSAEEVAmbient Temperature40°CAuxillary BoxNoAuxillaryBoxAuxillary Box Lead TerminationNoneBase IndicatorRigidBearing Grease TypePolyrexEM(-20F+300F)BlowerNoneBreak-Down Torque97.77LB-FTConduit Box MaterialCast IronConstant Torque Speed Range6Current @ Voltage37.000A@208.0VDesign CodeADrip CoverNoDripCoverDuty RatingCONTEfficiency @ 100% Load91.0%Electrically Isolated BearingNotElectricallyIsolatedEnclosureXPFCFeedback DeviceNOFEEDBACKFrame254TCFrame MaterialIronFrequency50.00HzFull Load Torque0LB-FTHeater IndicatorNoHeaterHigh Voltage Full Load Amps14.5aHP15Hz50/60Insulation ClassFInverter CodeInverterDutyIP RatingNONEKVA CodeHLifting LugsStandardLiftingLugsLine-Line Res. @ 25° C0.591OhmsAPh/0OhmsBPhLocked Bearing IndicatorLockedBearingLocked-Rotor Torque43.23LB-FTMax Speed5400rpmMotor Lead TerminationFlyingLeadsMotor Letter TypeThreePhaseMotor StandardsNEMAMotor Type0934MMotor Weight349Mounting ArrangementF1No-Load Current0ANumber of Poles2Output @ Frequency10.000HP@50HZOverall Length26.00INPhase3Power Factor88Product FamilyHazardousLocationMotorPull-Up Torque34.86LB-FTPulley Face CodeC-FaceRodent ScreenNoneRoHS StatusROHSNON-COMPLIANTRPM3400 - 3600Service Factor1Shaft Diameter1.625INShaft Ground IndicatorNoShaftGroundingShaft RotationReversibleSpeed3530rpmSpeed CodeSingleSpeedStart ConfigurationDOLStarting Current125AStarting MethodDirectonlineSynchronous RPM3600Synchronous Speed @ Frequency3600RPM@60HZTemp. Rise @ Rated Load42°CTemp. Rise @ S.F. Load51°CThermal Device - BearingNoneThermal Device - WindingNormallyClosedThermostatVibration Sensor IndicatorNoVibrationSensorVoltage190/230/380/460Voltage @ Frequency380.0V@50HZWinding Thermal 1NoneWinding Thermal 2NoneXP Class and GroupCLIGPC, DXP DivisionDivisionIXP Temp CodeT3C
Specifications
| Agency Approvals | CSAEEV |
| Ambient Temperature | 40°C |
| Auxillary Box | NoAuxillaryBox |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | PolyrexEM(-20F+300F) |
| Blower | None |
| Break-Down Torque | 97.77LB-FT |
| Conduit Box Material | Cast Iron |
| Constant Torque Speed Range | 6 |
| Current @ Voltage | 37.000A@208.0V |
| Design Code | A |
| Drip Cover | NoDripCover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.0% |
| Electrically Isolated Bearing | NotElectricallyIsolated |
| Enclosure | XPFC |
| Feedback Device | NOFEEDBACK |
| Frame | 254TC |
| Frame Material | Iron |
| Frequency | 50.00Hz |
| Full Load Torque | 0LB-FT |
| Heater Indicator | NoHeater |
| High Voltage Full Load Amps | 14.5a |
| HP | 15 |
| Hz | 50/60 |
| Insulation Class | F |
| Inverter Code | InverterDuty |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | StandardLiftingLugs |
| Line-Line Res. @ 25° C | 0.591OhmsAPh/0OhmsBPh |
| Locked Bearing Indicator | LockedBearing |
| Locked-Rotor Torque | 43.23LB-FT |
| Max Speed | 5400rpm |
| Motor Lead Termination | FlyingLeads |
| Motor Letter Type | ThreePhase |
| Motor Standards | NEMA |
| Motor Type | 0934M |
| Motor Weight | 349 |
| Mounting Arrangement | F1 |
| No-Load Current | 0A |
| Number of Poles | 2 |
| Output @ Frequency | 10.000HP@50HZ |
| Overall Length | 26.00IN |
| Phase | 3 |
| Power Factor | 88 |
| Product Family | HazardousLocationMotor |
| Pull-Up Torque | 34.86LB-FT |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| RoHS Status | ROHSNON-COMPLIANT |
| RPM | 3400 - 3600 |
| Service Factor | 1 |
| Shaft Diameter | 1.625IN |
| Shaft Ground Indicator | NoShaftGrounding |
| Shaft Rotation | Reversible |
| Speed | 3530rpm |
| Speed Code | SingleSpeed |
| Start Configuration | DOL |
| Starting Current | 125A |
| Starting Method | Directonline |
| Synchronous RPM | 3600 |
| Synchronous Speed @ Frequency | 3600RPM@60HZ |
| Temp. Rise @ Rated Load | 42°C |
| Temp. Rise @ S.F. Load | 51°C |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | NormallyClosedThermostat |
| Vibration Sensor Indicator | NoVibrationSensor |
| Voltage | 190/230/380/460 |
| Voltage @ Frequency | 380.0V@50HZ |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Class and Group | CLIGPC, D |
| XP Division | DivisionI |
| XP Temp Code | T3C |
CDRX251524T