Baldor CDRX18264T 2HP 1165//970RPM 3PH 60HZ 184TC XPFC F1
- Write a review
$3,277.84
Agency ApprovalsULAmbient Temperature40°CAuxillary BoxNoAuxillaryBoxAuxillary Box Lead TerminationNoneBase IndicatorRigidBearing Grease TypePolyrexEM(-20F+300F)BlowerNoneBreak-Down Torque30LB-FTConduit Box MaterialCast IronConstant Torque Speed Range6Current @ Voltage6.300A@230.0VDesign CodeBDrip CoverNoDripCoverDuty RatingCONTEfficiency @ 100% Load88.5%Electrically Isolated BearingNotElectricallyIsolatedEnclosureXPFCFeedback DeviceNOFEEDBACKFrame184TCFrame MaterialIronFrequency50.00HzFull Load Torque0LB-FTHeater IndicatorNoHeaterHigh Voltage Full Load Amps3.0aHP1.5Hz50/60Insulation ClassFInverter CodeInverterDutyIP RatingNONEKVA CodeKLifting LugsStandardLiftingLugsLine-Line Res. @ 25° C5.12OhmsAPh/0OhmsBPhLocked Bearing IndicatorLockedBearingLocked-Rotor Torque21LB-FTMax Speed1800rpmMotor Lead TerminationFlyingLeadsMotor Letter TypeThreePhaseMotor StandardsNEMAMotor Type0642MMotor Weight152Mounting ArrangementF1No-Load Current0ANumber of Poles6Output @ Frequency2.000HP@60HZOverall Length18.31INPhase3Power Factor68Product FamilyGeneralPurposePull-Up Torque17.62LB-FTPulley Face CodeC-FaceRodent ScreenNoneRoHS StatusROHSNON-COMPLIANTRPM1100 - 1200Service Factor1Shaft Diameter1.125INShaft Ground IndicatorNoShaftGroundingShaft RotationReversibleSpeed1165rpmSpeed CodeSingleSpeedStart ConfigurationDOLStarting Current20.39AStarting MethodDirectonlineSynchronous RPM1200Synchronous Speed @ Frequency1200RPM@60HZTemp. Rise @ Rated Load24°CTemp. Rise @ S.F. Load33°CThermal Device - BearingNoneThermal Device - WindingNormallyClosedThermostatVibration Sensor IndicatorNoVibrationSensorVoltage190/230/380/460Voltage @ Frequency380.0V@50HZWinding Thermal 1NoneWinding Thermal 2NoneXP Class and GroupCLIGPC, DXP DivisionDivisionIXP Temp CodeT3C
Specifications
| Agency Approvals | UL |
| Ambient Temperature | 40°C |
| Auxillary Box | NoAuxillaryBox |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | PolyrexEM(-20F+300F) |
| Blower | None |
| Break-Down Torque | 30LB-FT |
| Conduit Box Material | Cast Iron |
| Constant Torque Speed Range | 6 |
| Current @ Voltage | 6.300A@230.0V |
| Design Code | B |
| Drip Cover | NoDripCover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 88.5% |
| Electrically Isolated Bearing | NotElectricallyIsolated |
| Enclosure | XPFC |
| Feedback Device | NOFEEDBACK |
| Frame | 184TC |
| Frame Material | Iron |
| Frequency | 50.00Hz |
| Full Load Torque | 0LB-FT |
| Heater Indicator | NoHeater |
| High Voltage Full Load Amps | 3.0a |
| HP | 1.5 |
| Hz | 50/60 |
| Insulation Class | F |
| Inverter Code | InverterDuty |
| IP Rating | NONE |
| KVA Code | K |
| Lifting Lugs | StandardLiftingLugs |
| Line-Line Res. @ 25° C | 5.12OhmsAPh/0OhmsBPh |
| Locked Bearing Indicator | LockedBearing |
| Locked-Rotor Torque | 21LB-FT |
| Max Speed | 1800rpm |
| Motor Lead Termination | FlyingLeads |
| Motor Letter Type | ThreePhase |
| Motor Standards | NEMA |
| Motor Type | 0642M |
| Motor Weight | 152 |
| Mounting Arrangement | F1 |
| No-Load Current | 0A |
| Number of Poles | 6 |
| Output @ Frequency | 2.000HP@60HZ |
| Overall Length | 18.31IN |
| Phase | 3 |
| Power Factor | 68 |
| Product Family | GeneralPurpose |
| Pull-Up Torque | 17.62LB-FT |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| RoHS Status | ROHSNON-COMPLIANT |
| RPM | 1100 - 1200 |
| Service Factor | 1 |
| Shaft Diameter | 1.125IN |
| Shaft Ground Indicator | NoShaftGrounding |
| Shaft Rotation | Reversible |
| Speed | 1165rpm |
| Speed Code | SingleSpeed |
| Start Configuration | DOL |
| Starting Current | 20.39A |
| Starting Method | Directonline |
| Synchronous RPM | 1200 |
| Synchronous Speed @ Frequency | 1200RPM@60HZ |
| Temp. Rise @ Rated Load | 24°C |
| Temp. Rise @ S.F. Load | 33°C |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | NormallyClosedThermostat |
| Vibration Sensor Indicator | NoVibrationSensor |
| Voltage | 190/230/380/460 |
| Voltage @ Frequency | 380.0V@50HZ |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Class and Group | CLIGPC, D |
| XP Division | DivisionI |
| XP Temp Code | T3C |
CDRX18264T