Fasco D475 OEM Replacement Motor, 1/15 HP, 1 Ph, 60 Hz, 460 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAOD475 OEM Replacement Motor1/
- Write a review
$210.02
Ambient temperature (°C)40CENCountry of originMexicoCSANCurrent0.50 ADrive end bearingSleeveDutyAir overElectrical typeShaded poleEnclosureOpen air overFrame3.3Frame length3.07 inFrame MaterialSteelFrame materialSteelFrequency60 HzInsulation classBMountingExtended studsNumber of speeds1Opp drive end bearingSleeveOutput HP1/15 HPOutput KW0.05 kWOverall Length7.04 inPackaged height4.5 inPackaged length8 inPackaged width4.5 inPhase1Poles4RotationCounterclockwise shaft endService factor1Shaft diameter0.313 inShaft Diameter0.313 inShaft extension2.5 inShaft typeFlat & grooveSpeed1550 RPMStarting methodAcross the lineThermal protectionThermally protectedULNoVoltage460 V
Specifications
| Ambient temperature (°C) | 40 |
| CE | N |
| Country of origin | Mexico |
| CSA | N |
| Current | 0.50 A |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Electrical type | Shaded pole |
| Enclosure | Open air over |
| Frame | 3.3 |
| Frame length | 3.07 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 60 Hz |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/15 HP |
| Output KW | 0.05 kW |
| Overall Length | 7.04 in |
| Packaged height | 4.5 in |
| Packaged length | 8 in |
| Packaged width | 4.5 in |
| Phase | 1 |
| Poles | 4 |
| Rotation | Counterclockwise shaft end |
| Service factor | 1 |
| Shaft diameter | 0.313 in |
| Shaft Diameter | 0.313 in |
| Shaft extension | 2.5 in |
| Shaft type | Flat & groove |
| Speed | 1550 RPM |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | No |
| Voltage | 460 V |
D475