- New
Fasco D1174 OEM Replacement Motor, 1/12 HP, 1 Ph, 60 Hz, 460 V, 3000 RPM, 1 Speed, 3.3" Diameter, OAOD1174 OEM Replacement Motor
- Write a review
$236.16
Ambient temperature (°C)40CARRIERHC24AU725CENCountry of originMexicoCSANCurrent0.60 ADrive end bearingBallDutyAir overElectrical typeShaded poleEnclosureOpen air overFASCO7121-10605Frame3.3Frame length4.52 inFrame MaterialSteelFrame materialSteelFrequency60 HzInsulation classBMountingExtended studsNumber of speeds1Opp drive end bearingBallOutput HP1/12 HPOutput KW0.06 kWOverall Length9.69 inPackaged height4.25 inPackaged length11.38 inPackaged width6.5 inPhase1Poles2RotationClockwise shaft endRPM3000Shaft diameter0.250 inShaft Diameter0.250 inShaft extension2.5 inShaft typeFlatSpeed3000 rpmStarting methodAcross the lineThermal protectionThermally protectedULNoVoltage460 V
Specifications
| Ambient temperature (°C) | 40 |
| CARRIER | HC24AU725 |
| CE | N |
| Country of origin | Mexico |
| CSA | N |
| Current | 0.60 A |
| Drive end bearing | Ball |
| Duty | Air over |
| Electrical type | Shaded pole |
| Enclosure | Open air over |
| FASCO | 7121-10605 |
| Frame | 3.3 |
| Frame length | 4.52 in |
| Frame Material | Steel |
| Frame material | Steel |
| Frequency | 60 Hz |
| Insulation class | B |
| Mounting | Extended studs |
| Number of speeds | 1 |
| Opp drive end bearing | Ball |
| Output HP | 1/12 HP |
| Output KW | 0.06 kW |
| Overall Length | 9.69 in |
| Packaged height | 4.25 in |
| Packaged length | 11.38 in |
| Packaged width | 6.5 in |
| Phase | 1 |
| Poles | 2 |
| Rotation | Clockwise shaft end |
| RPM | 3000 |
| Shaft diameter | 0.250 in |
| Shaft Diameter | 0.250 in |
| Shaft extension | 2.5 in |
| Shaft type | Flat |
| Speed | 3000 rpm |
| Starting method | Across the line |
| Thermal protection | Thermally protected |
| UL | No |
| Voltage | 460 V |
D1174
