- New
Fasco D1161 OEM Replacement Motor
- Write a review
$179.61
Ambient temperature (°C)40Amperage2.90/2.20Bearings DE TypeSleeveBearings ODE TypeSleeveCENCountry of originMexicoCountry of OriginMexicoCSANDiameter3.3"Drive end bearingSleeveDutyAir overElectrical typeShaded poleElectrical TypeShaded PoleEnclosureOpen Air OverFASCO7163-5011Frame3.3Frame length1.95 inFrame MaterialSteelFrequency60 HzHeight8.50"HP1/15-1/25Insulation classBKW0.05Length6.81"MaterialSteelMountingLug BracketNumber of speeds1Opp drive end bearingSleeveOutput HP1/100 HPOutput KW0.01 kWOverall Length4.07 inPackaged height3.38 inPackaged length8 inPackaged width3.38 inPhaseSinglePoles4RotationCounterclockwise Shaft EndService factor1Shaft diameter0.313 inShaft Diameter0.313Shaft extension1.60Shaft Extension2.000"Shaft typeFlatShaft TypeFlatSpeed1550 RPMStarting methodAcross the lineThermal protectionImpedanceULNoVoltage115Width6.81"
Specifications
| Ambient temperature (°C) | 40 |
| Amperage | 2.90/2.20 |
| Bearings DE Type | Sleeve |
| Bearings ODE Type | Sleeve |
| CE | N |
| Country of origin | Mexico |
| Country of Origin | Mexico |
| CSA | N |
| Diameter | 3.3" |
| Drive end bearing | Sleeve |
| Duty | Air over |
| Electrical type | Shaded pole |
| Electrical Type | Shaded Pole |
| Enclosure | Open Air Over |
| FASCO | 7163-5011 |
| Frame | 3.3 |
| Frame length | 1.95 in |
| Frame Material | Steel |
| Frequency | 60 Hz |
| Height | 8.50" |
| HP | 1/15-1/25 |
| Insulation class | B |
| KW | 0.05 |
| Length | 6.81" |
| Material | Steel |
| Mounting | Lug Bracket |
| Number of speeds | 1 |
| Opp drive end bearing | Sleeve |
| Output HP | 1/100 HP |
| Output KW | 0.01 kW |
| Overall Length | 4.07 in |
| Packaged height | 3.38 in |
| Packaged length | 8 in |
| Packaged width | 3.38 in |
| Phase | Single |
| Poles | 4 |
| Rotation | Counterclockwise Shaft End |
| Service factor | 1 |
| Shaft diameter | 0.313 in |
| Shaft Diameter | 0.313 |
| Shaft extension | 1.60 |
| Shaft Extension | 2.000" |
| Shaft type | Flat |
| Shaft Type | Flat |
| Speed | 1550 RPM |
| Starting method | Across the line |
| Thermal protection | Impedance |
| UL | No |
| Voltage | 115 |
| Width | 6.81" |
D1161
