Dormer E292M3.5 6305733 M Machine Forming Tap DIN 2174 4FL M3.5 x 0.60 mm
- Write a review
$40.07
Basic StandardDIN 2174Clamping Length - millimeter (LSC)6Clamping width - inch0.1181Clamping width - millimeter (WSC)3CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4EDP number46305733Flute count (NOF)4Flute Geometry (FDC)Fluteless Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6305733Ordering code ANSIE292M3.5Overall length - inch (OAL)2.2047Overall length - millimeter (OAL)56Premachined hole diameter - inch (PHD)0.126Premachined hole diameter - millimeter (PHD)3.2ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3.5Thread diameter size (TDZ)3.5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0236Thread pitch - millimeter (TP)0.6Threading length - inch (THL)0.4331Threading length - millimeter (THL)11Usable length (ULDR)3Usable Length - inch (LU)0.7874Usable Length - millimeter (LU)20
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - inch | 0.1181 |
| Clamping width - millimeter (WSC) | 3 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| EDP number | 46305733 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Fluteless Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6305733 |
| Ordering code ANSI | E292M3.5 |
| Overall length - inch (OAL) | 2.2047 |
| Overall length - millimeter (OAL) | 56 |
| Premachined hole diameter - inch (PHD) | 0.126 |
| Premachined hole diameter - millimeter (PHD) | 3.2 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3.5 |
| Thread diameter size (TDZ) | 3.5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0236 |
| Thread pitch - millimeter (TP) | 0.6 |
| Threading length - inch (THL) | 0.4331 |
| Threading length - millimeter (THL) | 11 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 0.7874 |
| Usable Length - millimeter (LU) | 20 |
6305733
