Pramet CNMX 6-10SN-TF:T9310 6798526 Turning Insert - Heavy Duty And Railway
- Write a review
$28.23
ChipbreakerTFCoatingT9310Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.157Corner radius - millimeter (RE)4Cutting edge length - inch (L)0.76Cutting edge length - millimeter (L)19.3Depth of cut maximum - inch (APMX)0.276Depth of cut maximum - millimeter (APMX)7Depth of cut minimum - inch (APMN)0.157Depth of cut minimum - millimeter (APMN)4Feed maximal - millimeter1.2Feed minimal - millimeter0.4Feed_MAX_IMP_NUM0.047Feed_MIN_IMP_NUM0.016Fixing hole diameter - inch (D1)0.305Fixing hole diameter - millimeter (D1)7.75Inscribed circle diameter - inch (IC)0.75Inscribed circle diameter - millimeter (IC)19.05Insert thickness - millimeter (S)11
Specifications
| Chipbreaker | TF |
| Coating | T9310 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.157 |
| Corner radius - millimeter (RE) | 4 |
| Cutting edge length - inch (L) | 0.76 |
| Cutting edge length - millimeter (L) | 19.3 |
| Depth of cut maximum - inch (APMX) | 0.276 |
| Depth of cut maximum - millimeter (APMX) | 7 |
| Depth of cut minimum - inch (APMN) | 0.157 |
| Depth of cut minimum - millimeter (APMN) | 4 |
| Feed maximal - millimeter | 1.2 |
| Feed minimal - millimeter | 0.4 |
| Feed_MAX_IMP_NUM | 0.047 |
| Feed_MIN_IMP_NUM | 0.016 |
| Fixing hole diameter - inch (D1) | 0.305 |
| Fixing hole diameter - millimeter (D1) | 7.75 |
| Inscribed circle diameter - inch (IC) | 0.75 |
| Inscribed circle diameter - millimeter (IC) | 19.05 |
| Insert thickness - millimeter (S) | 11 |
6798526
