Dormer E500M2.5NO6 5975466 Machine Tap Straight Flute 3FL M2.5 x 0.45 mm
- Write a review
$63.98
Basic StandardISO 529Clamping Length - millimeter (LSC)5Clamping width - inch0.0882Clamping width - millimeter (WSC)2.8CoatingBrightCoating property (CTP)3Connection diameter - inch (DCON MS)0.1102Connection diameter - millimeter (DCON MS)44.5Coolant supply property (CSP)2.24EDP number154847Flute count (NOF)2.05Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5975466Ordering code ANSIE500M2.5NO6Overall length - inch (OAL)1.752Overall length - millimeter (OAL)9.5Premachined hole diameter - inch (PHD)0.0807Premachined hole diameter - millimeter (PHD)2.05ShankCylindrical shank with SquareThread diameter size (TDZ)2.5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0177Thread pitch - millimeter (TP)0.45Threading length - inch (THL)0.374Threading length - millimeter (THL)9.5Usable length (ULDR)1.5Usable Length - inch (LU)0.374Usable Length - millimeter (LU)9.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - inch | 0.0882 |
| Clamping width - millimeter (WSC) | 2.8 |
| Coating | Bright |
| Coating property (CTP) | 3 |
| Connection diameter - inch (DCON MS) | 0.1102 |
| Connection diameter - millimeter (DCON MS) | 44.5 |
| Coolant supply property (CSP) | 2.24 |
| EDP number | 154847 |
| Flute count (NOF) | 2.05 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5975466 |
| Ordering code ANSI | E500M2.5NO6 |
| Overall length - inch (OAL) | 1.752 |
| Overall length - millimeter (OAL) | 9.5 |
| Premachined hole diameter - inch (PHD) | 0.0807 |
| Premachined hole diameter - millimeter (PHD) | 2.05 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 2.5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0177 |
| Thread pitch - millimeter (TP) | 0.45 |
| Threading length - inch (THL) | 0.374 |
| Threading length - millimeter (THL) | 9.5 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.374 |
| Usable Length - millimeter (LU) | 9.5 |
5975466
