Dormer E8107/8 7350441 Machine Tap Red Shark for Alloy Steels Spiral Flute 4FL 7/8 inch x 9
- Write a review
$178.62
Basic StandardDIN/ANSIClamping width - inch0.52CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.697Connection diameter - millimeter (DCON MS)17.7Coolant supply property (CSP)49/64EDP number7350441Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number7350441Ordering code ANSIE8107/8Overall length - inch (OAL)5.512Overall length - millimeter (OAL)0.697Premachined hole diameter - imperial (PHD)49/64Premachined hole diameter - inch (PHD)0.7677Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)19.5Thread diameter size (TDZ)7/8Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.984Threads per inch (TPI)9Tolerance limitH6Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.52 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.697 |
| Connection diameter - millimeter (DCON MS) | 17.7 |
| Coolant supply property (CSP) | 49/64 |
| EDP number | 7350441 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 7350441 |
| Ordering code ANSI | E8107/8 |
| Overall length - inch (OAL) | 5.512 |
| Overall length - millimeter (OAL) | 0.697 |
| Premachined hole diameter - imperial (PHD) | 49/64 |
| Premachined hole diameter - inch (PHD) | 0.7677 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 19.5 |
| Thread diameter size (TDZ) | 7/8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.984 |
| Threads per inch (TPI) | 9 |
| Tolerance limit | H6 |
| Usable length (ULDR) | 2.5 |
7350441