Dormer E002TINM6 6196697 Machine Tap Spiral Flute 45° 3FL M6 x 1.00 mm
- Write a review
$23.97
Basic StandardISO 529Clamping Length - millimeter (LSC)8Clamping width - inch0.1969Clamping width - millimeter (WSC)5CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)6.3Connection diameter - millimeter (DCON MS)5EDP number46196697Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6196697Ordering code ANSIE002TINM6Overall length - inch (OAL)2.5984Overall length - millimeter (OAL)66Premachined hole diameter - inch (PHD)0.1969Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)5Thread diameter size (TDZ)6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.3937Threading length - millimeter (THL)10Usable length (ULDR)2.5Usable Length - inch (LU)1.063Usable Length - millimeter (LU)27
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - inch | 0.1969 |
| Clamping width - millimeter (WSC) | 5 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 6.3 |
| Connection diameter - millimeter (DCON MS) | 5 |
| EDP number | 46196697 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6196697 |
| Ordering code ANSI | E002TINM6 |
| Overall length - inch (OAL) | 2.5984 |
| Overall length - millimeter (OAL) | 66 |
| Premachined hole diameter - inch (PHD) | 0.1969 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 5 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.3937 |
| Threading length - millimeter (THL) | 10 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.063 |
| Usable Length - millimeter (LU) | 27 |
6196697
