Dormer C6091/2 7647931 Roughing End Mill 4FL 1/2 inch
- Write a review
$80.94
Basic StandardANSICoatingTiCNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)1/2Connection diameter - inch (DCON MS)0.5Connection diameter - millimeter (DCON MS)12.7Cut lengthMediumCutting diameter - fractional inch (DC)1/2Cutting diameter - inch (DC)0.5Cutting diameter - millimeter (DC)12.7Cutting diameter tolerance class (TCDC)ANSI +.005/-.000Depth of cut maximum - fractional inch (APMX)1.1/4EDP number7647931Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-EMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7647931Mill ProfileHRA - Fine Pitch Asymmetrical Rounded Profile ChipbreakerOrdering code ANSIC6091/2Overall length - fractional inch (OAL)3.1/4Overall length - inch (OAL)3.25Overall length - millimeter (OAL)82.55Radial rake angle (GAMF)15ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.5 |
| Connection diameter - millimeter (DCON MS) | 12.7 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/2 |
| Cutting diameter - inch (DC) | 0.5 |
| Cutting diameter - millimeter (DC) | 12.7 |
| Cutting diameter tolerance class (TCDC) | ANSI +.005/-.000 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/4 |
| EDP number | 7647931 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7647931 |
| Mill Profile | HRA - Fine Pitch Asymmetrical Rounded Profile Chipbreaker |
| Ordering code ANSI | C6091/2 |
| Overall length - fractional inch (OAL) | 3.1/4 |
| Overall length - inch (OAL) | 3.25 |
| Overall length - millimeter (OAL) | 82.55 |
| Radial rake angle (GAMF) | 15 |
| Shank | Cylindrical shank |
7647931
