Pramet 075E3R315C075-ISBN10-C 7455292 End Milling Cutter - High Feed
- Write a review
$321.83
Axial rake angle (GAMP)-10.5Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.75Connection diameter - millimeter (DCON MS)19.1Coolant supply property (CSP)1Cutting diameter - inch (DC)0.49Cutting diameter - millimeter (DC)12.4Cutting diameter maximum - inch (DCX)0.75Cutting diameter maximum - millimeter (DCX)19.1Hand (Cutting direction)RightOverall length - inch (OAL)6.299Overall length - millimeter (OAL)160Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)-10Rotational speed maximum (RPMX)28400ShankCylindrical shank DIN 1835ATool cutting edge angle (KAPR)20Usable Length - inch (LU)3.15
Specifications
| Axial rake angle (GAMP) | -10.5 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.75 |
| Connection diameter - millimeter (DCON MS) | 19.1 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.49 |
| Cutting diameter - millimeter (DC) | 12.4 |
| Cutting diameter maximum - inch (DCX) | 0.75 |
| Cutting diameter maximum - millimeter (DCX) | 19.1 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 6.299 |
| Overall length - millimeter (OAL) | 160 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | -10 |
| Rotational speed maximum (RPMX) | 28400 |
| Shank | Cylindrical shank DIN 1835A |
| Tool cutting edge angle (KAPR) | 20 |
| Usable Length - inch (LU) | 3.15 |
7455292
