Dormer C6019/16X1/2 7647840 End Mill ANSI 9/16 inch
- Write a review
$34.25
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/2Connection diameter - inch (DCON MS)0.5Connection diameter - millimeter (DCON MS)12.7Cut lengthMediumCutting diameter - fractional inch (DC)9/16Cutting diameter - inch (DC)0.5625Cutting diameter - millimeter (DC)14.29Cutting diameter tolerance class (TCDC)ANSI +.003/-.000Depth of cut maximum - fractional inch (APMX)1.1/8EDP number7647840Flute count (NOF)2Flute helix angle (FHA)30MaterialHSSMaterial applicationP - Steel and cast steelMID number7647840Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC6019/16X1/2Overall length - fractional inch (OAL)3.3/8Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.5 |
| Connection diameter - millimeter (DCON MS) | 12.7 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 9/16 |
| Cutting diameter - inch (DC) | 0.5625 |
| Cutting diameter - millimeter (DC) | 14.29 |
| Cutting diameter tolerance class (TCDC) | ANSI +.003/-.000 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/8 |
| EDP number | 7647840 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 7647840 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C6019/16X1/2 |
| Overall length - fractional inch (OAL) | 3.3/8 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7647840
