Dormer E626M3 7350453 Machine Tap Red Shark for Alloy Steels Spiral Flute 3FL M3 x 0.50 mm
- Write a review
$34.43
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)5Clamping width - inch0.108CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.141Connection diameter - millimeter (DCON MS)3.58Coolant supply property (CSP)N40EDP number7350453Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number7350453Ordering code ANSIE626M3Overall length - inch (OAL)2.2047Overall length - millimeter (OAL)0.141Premachined hole diameter - imperial (PHD)N40Premachined hole diameter - inch (PHD)0.0984Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)2.5Thread diameter size (TDZ)3Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0197Thread pitch - millimeter (TP)0.5Threading length - inch (THL)0.2362Threading length - millimeter (THL)6Tolerance limitD3Usable length (ULDR)2.5Usable Length - inch (LU)0.7087Usable Length - millimeter (LU)18
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - inch | 0.108 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.141 |
| Connection diameter - millimeter (DCON MS) | 3.58 |
| Coolant supply property (CSP) | N40 |
| EDP number | 7350453 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 7350453 |
| Ordering code ANSI | E626M3 |
| Overall length - inch (OAL) | 2.2047 |
| Overall length - millimeter (OAL) | 0.141 |
| Premachined hole diameter - imperial (PHD) | N40 |
| Premachined hole diameter - inch (PHD) | 0.0984 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 2.5 |
| Thread diameter size (TDZ) | 3 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0197 |
| Thread pitch - millimeter (TP) | 0.5 |
| Threading length - inch (THL) | 0.2362 |
| Threading length - millimeter (THL) | 6 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.7087 |
| Usable Length - millimeter (LU) | 18 |
7350453