Dormer S1381/2 7648854 Ball-Nosed End Mill 4FL 1/2 inch
- Write a review
$64.44
Basic StandardDORMER"CoatingBrightConnection diameter - fractional inch (DCON MS)1/2Connection diameter - inch (DCON MS)0.5Connection diameter - millimeter (DCON MS)12.7Corner radius - fractional inch (RE)1/4Corner radius - inch (RE)0.25Cut lengthMediumCutting diameter - fractional inch (DC)1/2Cutting diameter - inch (DC)0.5Cutting diameter - millimeter (DC)12.7Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1EDP number7648854Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648854Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1381/2Overall length - fractional inch (OAL)3"Overall length - inch (OAL)3Overall length - millimeter (OAL)76.2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER" |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.5 |
| Connection diameter - millimeter (DCON MS) | 12.7 |
| Corner radius - fractional inch (RE) | 1/4 |
| Corner radius - inch (RE) | 0.25 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/2 |
| Cutting diameter - inch (DC) | 0.5 |
| Cutting diameter - millimeter (DC) | 12.7 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1 |
| EDP number | 7648854 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648854 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1381/2 |
| Overall length - fractional inch (OAL) | 3" |
| Overall length - inch (OAL) | 3 |
| Overall length - millimeter (OAL) | 76.2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648854
