Dormer E500M14NO2 5975317 Machine Tap Straight Flute 4FL M14 x 2.00 mm
- Write a review
$42.56
Basic StandardISO 529Clamping Length - millimeter (LSC)12Clamping width - fractional inch (WSC)9Clamping width - inch0.3543CoatingBrightConnection diameter - inch (DCON MS)0.4409Connection diameter - millimeter (DCON MS)11.2EDP number160206Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976983Ordering code ANSIE500M1.4NO2Overall length - inch (OAL)3.7402Overall length - millimeter (OAL)95Premachined hole diameter - inch (PHD)0.4724Premachined hole diameter - millimeter (PHD)12ShankCylindrical shank with SquareThread diameter size (TDZ)14Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - inch (THL)0.9449Threading length - millimeter (THL)24Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - fractional inch (WSC) | 9 |
| Clamping width - inch | 0.3543 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.4409 |
| Connection diameter - millimeter (DCON MS) | 11.2 |
| EDP number | 160206 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976983 |
| Ordering code ANSI | E500M1.4NO2 |
| Overall length - inch (OAL) | 3.7402 |
| Overall length - millimeter (OAL) | 95 |
| Premachined hole diameter - inch (PHD) | 0.4724 |
| Premachined hole diameter - millimeter (PHD) | 12 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 14 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - inch (THL) | 0.9449 |
| Threading length - millimeter (THL) | 24 |
| Usable length (ULDR) | 1.5 |
5975317
