Dormer A002S3/8 6524881 118° Split Point Tipped Jobber Drill 3/8 inch
- Write a review
$11.55
ApplicationAngleIcon_DICT_SELDrill point 118°Basic StandardDIN 338CoatingBright/TiNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shankConnection diameter - inch (DCON MS)0.3748Connection diameter - millimeter (DCON MS)9.52Cutting diameter - fractional inch (DC)3/8Cutting diameter - inch (DC)0.375Cutting diameter - millimeter (DC)9.52Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number46524881Hand (Cutting direction)RightLength chip flute - inch (LCF)3.4252Length chip flute - millimeter (LCF)87MaterialHSSMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steelMID number6524881Ordering code ANSIA002S3/8Overall length - inch (OAL)5.2362Overall length - millimeter (OAL)133Point Angle (SIG)118Spiral formStandard SpiralSurface treatementTiN TippedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 118° |
| Basic Standard | DIN 338 |
| Coating | Bright/TiN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - inch (DCON MS) | 0.3748 |
| Connection diameter - millimeter (DCON MS) | 9.52 |
| Cutting diameter - fractional inch (DC) | 3/8 |
| Cutting diameter - inch (DC) | 0.375 |
| Cutting diameter - millimeter (DC) | 9.52 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 46524881 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 3.4252 |
| Length chip flute - millimeter (LCF) | 87 |
| Material | HSS |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6524881 |
| Ordering code ANSI | A002S3/8 |
| Overall length - inch (OAL) | 5.2362 |
| Overall length - millimeter (OAL) | 133 |
| Point Angle (SIG) | 118 |
| Spiral form | Standard Spiral |
| Surface treatement | TiN Tipped |
| Usable length (ULDR) | 4 |
6524881
