Pramet BNGX 10T308SR-MM:M9340 7253621 Milling Insert - High Feed
- Write a review
$17.41
ChipbreakerMMCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedCorner radius - inch (RE)0.031Corner radius - millimeter (RE)0.8Cutting edge length - inch (L)0.391Cutting edge length - millimeter (L)9.92Depth of cut maximum - inch (APMX)0.039Depth of cut maximum - millimeter (APMX)1Feed maximal - millimeter0.83Feed minimal - millimeter0.2Feed_MAX_IMP_NUM0.033Feed_MIN_IMP_NUM0.008Fixing hole diameter - inch (D1)0.109Fixing hole diameter - millimeter (D1)2.76Insert shape code (SC)B - parallelogram 82° included angleInsert thickness - inch (S)0.154Insert thickness - millimeter (S)3.9Insert width - inch (W1)0.228Insert width - millimeter (W1)5.8
Specifications
| Chipbreaker | MM |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Corner radius - inch (RE) | 0.031 |
| Corner radius - millimeter (RE) | 0.8 |
| Cutting edge length - inch (L) | 0.391 |
| Cutting edge length - millimeter (L) | 9.92 |
| Depth of cut maximum - inch (APMX) | 0.039 |
| Depth of cut maximum - millimeter (APMX) | 1 |
| Feed maximal - millimeter | 0.83 |
| Feed minimal - millimeter | 0.2 |
| Feed_MAX_IMP_NUM | 0.033 |
| Feed_MIN_IMP_NUM | 0.008 |
| Fixing hole diameter - inch (D1) | 0.109 |
| Fixing hole diameter - millimeter (D1) | 2.76 |
| Insert shape code (SC) | B - parallelogram 82° included angle |
| Insert thickness - inch (S) | 0.154 |
| Insert thickness - millimeter (S) | 3.9 |
| Insert width - inch (W1) | 0.228 |
| Insert width - millimeter (W1) | 5.8 |
7253621
