Dormer C29510.0 5983809 End Mill N 844 L 10.00 mm
- Write a review
$66.98
Basic StandardDIN 844 LCoatingTiCNCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cut lengthLongCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)1.7717Depth of cut maximum - millimeter (APMX)45EDP number355145Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983809Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.374Neck diameter - millimeter (DN)9.5Ordering code ANSIC29510.0Overall length - inch (OAL)3.7402Overall length - millimeter (OAL)95Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)54.5
Specifications
| Basic Standard | DIN 844 L |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 1.7717 |
| Depth of cut maximum - millimeter (APMX) | 45 |
| EDP number | 355145 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983809 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.374 |
| Neck diameter - millimeter (DN) | 9.5 |
| Ordering code ANSI | C29510.0 |
| Overall length - inch (OAL) | 3.7402 |
| Overall length - millimeter (OAL) | 95 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 54.5 |
5983809
