- New
Pramet WNGF 201380-MM-S01:T6310 7317943 Bar Peeling Insert
- Write a review
$87.97
ChipbreakerMM-S01CoatingT6310Coating processPVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCutting edge length - inch (L)0.787Cutting edge length - millimeter (L)20Depth of cut maximum - inch (APMX)0.315Depth of cut maximum - millimeter (APMX)8Depth of cut minimum - inch (APMN)0.02Depth of cut minimum - millimeter (APMN)0.5Feed maximal - millimeter12Feed minimal - millimeter2Feed_MAX_IMP_NUM0.472Feed_MIN_IMP_NUM0.079Inscribed circle diameter - inch (IC)1.25Inscribed circle diameter - millimeter (IC)31.75Insert included angle (EPSR)85Insert shape code (SC)W - trigonInsert thickness - inch (S)0.512Insert thickness - millimeter (S)13Major cutting edge angle (KRINS)25Wiper edge length - inch (BS)0.591Wiper edge length - millimeter (BS)15
Specifications
| Chipbreaker | MM-S01 |
| Coating | T6310 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Cutting edge length - inch (L) | 0.787 |
| Cutting edge length - millimeter (L) | 20 |
| Depth of cut maximum - inch (APMX) | 0.315 |
| Depth of cut maximum - millimeter (APMX) | 8 |
| Depth of cut minimum - inch (APMN) | 0.02 |
| Depth of cut minimum - millimeter (APMN) | 0.5 |
| Feed maximal - millimeter | 12 |
| Feed minimal - millimeter | 2 |
| Feed_MAX_IMP_NUM | 0.472 |
| Feed_MIN_IMP_NUM | 0.079 |
| Inscribed circle diameter - inch (IC) | 1.25 |
| Inscribed circle diameter - millimeter (IC) | 31.75 |
| Insert included angle (EPSR) | 85 |
| Insert shape code (SC) | W - trigon |
| Insert thickness - inch (S) | 0.512 |
| Insert thickness - millimeter (S) | 13 |
| Major cutting edge angle (KRINS) | 25 |
| Wiper edge length - inch (BS) | 0.591 |
| Wiper edge length - millimeter (BS) | 15 |
WNGF 201380-MM-S01:T6310
