Dormer S5346.0 6706578 Ball-Nosed End Mill 6.00 mm
- Write a review
$72.86
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Corner radius - inch (RE)0.1181Corner radius - millimeter (RE)3Cut lengthExtra shortCutting diameter - inch (DC)0.2362Cutting diameter - millimeter (DC)6Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.3937Depth of cut maximum - millimeter (APMX)10EDP number46706578Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationH - Hardened materialsMID number6706578Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.2165Neck diameter - millimeter (DN)5.5Ordering code ANSIS5346.0Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-10ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)20
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Corner radius - inch (RE) | 0.1181 |
| Corner radius - millimeter (RE) | 3 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.2362 |
| Cutting diameter - millimeter (DC) | 6 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.3937 |
| Depth of cut maximum - millimeter (APMX) | 10 |
| EDP number | 46706578 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706578 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.2165 |
| Neck diameter - millimeter (DN) | 5.5 |
| Ordering code ANSI | S5346.0 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -10 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 20 |
6706578
