Pramet TPKR 43PDSR:M9325 6754582 Milling Insert - Square Shoulder
- Write a review
$11.99
Coating0.012Coating process0.004Coating property (CTP)1Cooling effectWith chipbreaker -no designationCorner radius - inch (RE)M9325Corner radius - millimeter (RE)MT-CVDCutting edge effective length - inch (LE)0.5Cutting edge effective length - millimeter (LE)12.7Cutting edge length - inch (L)0.866Cutting edge length - millimeter (L)22Depth of cut maximum - inch (APMX)0.669Depth of cut maximum - millimeter (APMX)17Feed maximal - millimeter0.3Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.039Feed_MIN_IMP_NUM1Inscribed circle diameter - inch (IC)0.14Inscribed circle diameter - millimeter (IC)3.55Insert cutting diameter - millimeter (CDI)4.76Insert thickness - millimeter (S)0.055Insert width - inch (W1)1.4Wiper edge length - inch (BS)Very negative effect on tool life - cooling is not recommended
Specifications
| Coating | 0.012 |
| Coating process | 0.004 |
| Coating property (CTP) | 1 |
| Cooling effect | With chipbreaker -no designation |
| Corner radius - inch (RE) | M9325 |
| Corner radius - millimeter (RE) | MT-CVD |
| Cutting edge effective length - inch (LE) | 0.5 |
| Cutting edge effective length - millimeter (LE) | 12.7 |
| Cutting edge length - inch (L) | 0.866 |
| Cutting edge length - millimeter (L) | 22 |
| Depth of cut maximum - inch (APMX) | 0.669 |
| Depth of cut maximum - millimeter (APMX) | 17 |
| Feed maximal - millimeter | 0.3 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.039 |
| Feed_MIN_IMP_NUM | 1 |
| Inscribed circle diameter - inch (IC) | 0.14 |
| Inscribed circle diameter - millimeter (IC) | 3.55 |
| Insert cutting diameter - millimeter (CDI) | 4.76 |
| Insert thickness - millimeter (S) | 0.055 |
| Insert width - inch (W1) | 1.4 |
| Wiper edge length - inch (BS) | Very negative effect on tool life - cooling is not recommended |
6754582
