Dormer C12614.0 5983847 Slot Drill 14.00 mm
- Write a review
$60.84
Basic StandardDIN 327 DCoatingTiCNCoating property (CTP)1Connection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthExtra shortCutting diameter - inch (DC)0.5512Cutting diameter - millimeter (DC)14Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.6299Depth of cut maximum - millimeter (APMX)16EDP number353967Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983847Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.4528Neck diameter - millimeter (DN)11.5Ordering code ANSIC12614.0Overall length - inch (OAL)2.874Overall length - millimeter (OAL)73Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)27.5
Specifications
| Basic Standard | DIN 327 D |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.5512 |
| Cutting diameter - millimeter (DC) | 14 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.6299 |
| Depth of cut maximum - millimeter (APMX) | 16 |
| EDP number | 353967 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983847 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.4528 |
| Neck diameter - millimeter (DN) | 11.5 |
| Ordering code ANSI | C12614.0 |
| Overall length - inch (OAL) | 2.874 |
| Overall length - millimeter (OAL) | 73 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 27.5 |
5983847
