Pramet ADMX 11T308SR-M:M9315 6754550 Milling Insert - Square Shoulder
- Write a review
$15.03
Coating0.006Coating process0.004Coating property (CTP)1Cooling effectMCorner radius - inch (RE)M9315Corner radius - millimeter (RE)MT-CVDCutting edge length - inch (L)0.433Cutting edge length - millimeter (L)11Depth of cut maximum - inch (APMX)0.354Depth of cut maximum - millimeter (APMX)9Feed maximal - millimeter0.14Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.008Feed_MIN_IMP_NUM0.2Fixing hole diameter - inch (D1)0.114Fixing hole diameter - millimeter (D1)2.9Insert cutting diameter - millimeter (CDI)3.97Insert diameter - inch (INSD)0.257Insert diameter - millimeter (INSD)6.53Insert shape code (SC)A - parallelogram 85° included angleInsert thickness - inch (S)0.8Insert thickness - millimeter (S)3.97Insert width - inch (W1)0.257Insert width - millimeter (W1)6.53Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Very negative effect on tool life - cooling is not recommended
Specifications
| Coating | 0.006 |
| Coating process | 0.004 |
| Coating property (CTP) | 1 |
| Cooling effect | M |
| Corner radius - inch (RE) | M9315 |
| Corner radius - millimeter (RE) | MT-CVD |
| Cutting edge length - inch (L) | 0.433 |
| Cutting edge length - millimeter (L) | 11 |
| Depth of cut maximum - inch (APMX) | 0.354 |
| Depth of cut maximum - millimeter (APMX) | 9 |
| Feed maximal - millimeter | 0.14 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.008 |
| Feed_MIN_IMP_NUM | 0.2 |
| Fixing hole diameter - inch (D1) | 0.114 |
| Fixing hole diameter - millimeter (D1) | 2.9 |
| Insert cutting diameter - millimeter (CDI) | 3.97 |
| Insert diameter - inch (INSD) | 0.257 |
| Insert diameter - millimeter (INSD) | 6.53 |
| Insert shape code (SC) | A - parallelogram 85° included angle |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 3.97 |
| Insert width - inch (W1) | 0.257 |
| Insert width - millimeter (W1) | 6.53 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Very negative effect on tool life - cooling is not recommended |
6754550
