Dormer E8091 7350481 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 4FL 1 inch x 8
- Write a review
$136.68
Basic StandardDIN/ANSIClamping width - inch0.597CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.8Connection diameter - millimeter (DCON MS)20.32EDP number7350481Flute count (NOF)4Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350481Ordering code ANSIE8091Overall length - inch (OAL)6.299Overall length - millimeter (OAL)0.8Premachined hole diameter - imperial (PHD)7/8Premachined hole diameter - inch (PHD)0.876Premachined hole diameter - millimeter (PHD)22.25ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)7/8Thread diameter size (TDZ)1"Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)1.417Threads per inch (TPI)8Tolerance limitH6Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.597 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.8 |
| Connection diameter - millimeter (DCON MS) | 20.32 |
| EDP number | 7350481 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350481 |
| Ordering code ANSI | E8091 |
| Overall length - inch (OAL) | 6.299 |
| Overall length - millimeter (OAL) | 0.8 |
| Premachined hole diameter - imperial (PHD) | 7/8 |
| Premachined hole diameter - inch (PHD) | 0.876 |
| Premachined hole diameter - millimeter (PHD) | 22.25 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | 7/8 |
| Thread diameter size (TDZ) | 1" |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 1.417 |
| Threads per inch (TPI) | 8 |
| Tolerance limit | H6 |
| Usable length (ULDR) | 2.5 |
7350481