Pramet 802D-0875-175-S100 6801100 Indexable Drill 2 x D
- Write a review
$428.77
Adjustment limit maximum - inch (ADJLX)0.019Adjustment limit minimum - inch (ADJLN)0.011Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1Connection diameter - millimeter (DCON MS)25.4Connection diameter tolerance machine side (TCDCONMS)h6Cooling (CSP)1Cutting diameter - inch (DC)0.875Cutting diameter - millimeter (DC)22.2Depth of cut maximum - inch (APMX)1.75Overall length - inch (OAL)4.976Overall length - millimeter (OAL)126Protruding length - inch (LPR)2.732ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.244Usable length (ULDR)2Usable Length - inch (LU)1.992
Specifications
| Adjustment limit maximum - inch (ADJLX) | 0.019 |
| Adjustment limit minimum - inch (ADJLN) | 0.011 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1 |
| Connection diameter - millimeter (DCON MS) | 25.4 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cooling (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.875 |
| Cutting diameter - millimeter (DC) | 22.2 |
| Depth of cut maximum - inch (APMX) | 1.75 |
| Overall length - inch (OAL) | 4.976 |
| Overall length - millimeter (OAL) | 126 |
| Protruding length - inch (LPR) | 2.732 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.244 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 1.992 |
6801100
