Dormer S722HB8.0 8030355 End Mill
- Write a review
$85.20
Basic StandardDORMERCoatingAlCrNConnection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner radius - inch (RE)0.0079Corner radius - millimeter (RE)0.2Cut lengthMediumCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.7874Depth of cut maximum - millimeter (APMX)20EDP number8030355Flute count (NOF)4Flute helix angle (FHA)40Material applicationK - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMaterial code (BMC)HMMID number8030355Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.2913Neck diameter - millimeter (DN)7.4Ordering code ANSIS722HB8.0Overall length - inch (OAL)2.5197Overall length - millimeter (OAL)64Radial rake angle (GAMF)7ShankCylindrical shank DIN 6535 HBUsable Length - millimeter (LU)26
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner radius - inch (RE) | 0.0079 |
| Corner radius - millimeter (RE) | 0.2 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.7874 |
| Depth of cut maximum - millimeter (APMX) | 20 |
| EDP number | 8030355 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| Material code (BMC) | HM |
| MID number | 8030355 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.2913 |
| Neck diameter - millimeter (DN) | 7.4 |
| Ordering code ANSI | S722HB8.0 |
| Overall length - inch (OAL) | 2.5197 |
| Overall length - millimeter (OAL) | 64 |
| Radial rake angle (GAMF) | 7 |
| Shank | Cylindrical shank DIN 6535 HB |
| Usable Length - millimeter (LU) | 26 |
8030355
