Dormer S52516.0 6706817 Finishing End Mill 16.00 mm
- Write a review
$323.74
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Cut lengthShortCutting diameter - inch (DC)0.6299Cutting diameter - millimeter (DC)16Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)1.1811Depth of cut maximum - millimeter (APMX)30EDP number46706817Flute count (NOF)8Flute helix angle (FHA)50MaterialHMMaterial applicationH - Hardened materialsMID number6706817Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.5906Neck diameter - millimeter (DN)15Ordering code ANSIS52516.0Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Peripheral effective cutting edge count (ZEFP)8Radial rake angle (GAMF)-26ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)46
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.6299 |
| Cutting diameter - millimeter (DC) | 16 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 1.1811 |
| Depth of cut maximum - millimeter (APMX) | 30 |
| EDP number | 46706817 |
| Flute count (NOF) | 8 |
| Flute helix angle (FHA) | 50 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706817 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.5906 |
| Neck diameter - millimeter (DN) | 15 |
| Ordering code ANSI | S52516.0 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Peripheral effective cutting edge count (ZEFP) | 8 |
| Radial rake angle (GAMF) | -26 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 46 |
6706817
