Pramet 805D-26-130-S32 6759016 Indexable Drill 5 x D
- Write a review
$556.27
Adjustment limit maximum - millimeter (ADJLX)0.5Adjustment limit minimum - millimeter (ADJLN)0.1Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.26Connection diameter - millimeter (DCON MS)32Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)1.024Cutting diameter - millimeter (DC)26Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)5.1181Depth of cut maximum - millimeter (APMX)130Flange diameter - millimeter (DF)42Overall length - inch (OAL)8.465Overall length - millimeter (OAL)215Protruding length - inch (LPR)6.1024Protruding length - millimeter (LPR)155ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.3622Shank length - millimeter (LS)60Usable length (ULDR)5Usable Length - inch (LU)5.3346Usable Length - millimeter (LU)135.5
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.5 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.1 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.26 |
| Connection diameter - millimeter (DCON MS) | 32 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.024 |
| Cutting diameter - millimeter (DC) | 26 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 5.1181 |
| Depth of cut maximum - millimeter (APMX) | 130 |
| Flange diameter - millimeter (DF) | 42 |
| Overall length - inch (OAL) | 8.465 |
| Overall length - millimeter (OAL) | 215 |
| Protruding length - inch (LPR) | 6.1024 |
| Protruding length - millimeter (LPR) | 155 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.3622 |
| Shank length - millimeter (LS) | 60 |
| Usable length (ULDR) | 5 |
| Usable Length - inch (LU) | 5.3346 |
| Usable Length - millimeter (LU) | 135.5 |
6759016
