Dormer C2731/8 5984576 End Mill N 844 L 1/8 inch
- Write a review
$34.55
Basic StandardDIN 844 LCoatingBrightConnection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Cut lengthLongCutting diameter - fractional inch (DC)1/8Cutting diameter - inch (DC)0.125Cutting diameter - millimeter (DC)3.18Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)0.5906Depth of cut maximum - millimeter (APMX)15EDP number640265Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984576Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC2731/8Overall length - inch (OAL)2.3228Overall length - millimeter (OAL)59Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 L |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Cut length | Long |
| Cutting diameter - fractional inch (DC) | 1/8 |
| Cutting diameter - inch (DC) | 0.125 |
| Cutting diameter - millimeter (DC) | 3.18 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 0.5906 |
| Depth of cut maximum - millimeter (APMX) | 15 |
| EDP number | 640265 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984576 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C2731/8 |
| Overall length - inch (OAL) | 2.3228 |
| Overall length - millimeter (OAL) | 59 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5984576
