Pramet 125N4R150W125-ISSE09-C 6789714 End Milling Cutter - Face
- Write a review
$343.43
Axial rake angle (GAMP)20Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.25Connection diameter - millimeter (DCON MS)31.8Coolant supply property (CSP)1Cutting diameter - inch (DC)1.25Cutting diameter - millimeter (DC)31.8Cutting diameter maximum - inch (DCX)1.644Cutting diameter maximum - millimeter (DCX)41.8Hand (Cutting direction)RightOverall length - inch (OAL)4.039Overall length - millimeter (OAL)103Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-5Rotational speed maximum (RPMX)19400ShankWeldon shank DIN 1835BUsable Length - inch (LU)1.5
Specifications
| Axial rake angle (GAMP) | 20 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.25 |
| Connection diameter - millimeter (DCON MS) | 31.8 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.25 |
| Cutting diameter - millimeter (DC) | 31.8 |
| Cutting diameter maximum - inch (DCX) | 1.644 |
| Cutting diameter maximum - millimeter (DCX) | 41.8 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 4.039 |
| Overall length - millimeter (OAL) | 103 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -5 |
| Rotational speed maximum (RPMX) | 19400 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - inch (LU) | 1.5 |
6789714
