Dormer E51510-24NO1 5977077 UNC Machine Tap Straight Flute 3FL No.10 x 24
- Write a review
$15.99
Basic StandardISO 529Clamping Length - millimeter (LSC)7Clamping width - fractional inch (WSC)4Clamping width - inch0.1575CoatingBrightConnection diameter - inch (DCON MS)0.1969Connection diameter - millimeter (DCON MS)5Coolant supply property (CSP)4.826EDP number154090Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5977077Ordering code ANSIE51510-24NO1Overall length - inch (OAL)2.2835Overall length - millimeter (OAL)58Premachined hole diameter - inch (PHD)0.1535Premachined hole diameter - millimeter (PHD)3.9ShankCylindrical shank with SquareThread diameter - inch (TD)0.19Thread diameter - millimeter (TD)4.826Thread diameter size (TDZ)10Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.4331Threading length - millimeter (THL)11Threads per inch (TPI)24Usable length (ULDR)1.5Usable Length - inch (LU)0.7874Usable Length - millimeter (LU)20
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 7 |
| Clamping width - fractional inch (WSC) | 4 |
| Clamping width - inch | 0.1575 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1969 |
| Connection diameter - millimeter (DCON MS) | 5 |
| Coolant supply property (CSP) | 4.826 |
| EDP number | 154090 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5977077 |
| Ordering code ANSI | E51510-24NO1 |
| Overall length - inch (OAL) | 2.2835 |
| Overall length - millimeter (OAL) | 58 |
| Premachined hole diameter - inch (PHD) | 0.1535 |
| Premachined hole diameter - millimeter (PHD) | 3.9 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.19 |
| Thread diameter - millimeter (TD) | 4.826 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.4331 |
| Threading length - millimeter (THL) | 11 |
| Threads per inch (TPI) | 24 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.7874 |
| Usable Length - millimeter (LU) | 20 |
5977077
