Dormer S2151/8 7648644 Ball-Nosed End Mill 2FL 1/8 inch
- Write a review
$30.94
Basic StandardDORMERCoatingTiAlNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)1/8Connection diameter - millimeter (DCON MS)3.18Corner radius - fractional inch (RE)1/16Corner radius - inch (RE)0.063Cut lengthExtra longCutting diameter - fractional inch (DC)1/8Cutting diameter - inch (DC)0.125"Cutting diameter - millimeter (DC)3.18Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1EDP number7648644Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number7648644Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS2151/8Overall length - fractional inch (OAL)3"Overall length - inch (OAL)3Overall length - millimeter (OAL)76.2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 1/8 |
| Connection diameter - millimeter (DCON MS) | 3.18 |
| Corner radius - fractional inch (RE) | 1/16 |
| Corner radius - inch (RE) | 0.063 |
| Cut length | Extra long |
| Cutting diameter - fractional inch (DC) | 1/8 |
| Cutting diameter - inch (DC) | 0.125" |
| Cutting diameter - millimeter (DC) | 3.18 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1 |
| EDP number | 7648644 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7648644 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S2151/8 |
| Overall length - fractional inch (OAL) | 3" |
| Overall length - inch (OAL) | 3 |
| Overall length - millimeter (OAL) | 76.2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648644
