Dormer EP00M2.5 5973414 Machine Tap Spiral Point 2FL M2.5 x 0.45 mm
- Write a review
$24.14
Basic StandardDIN 371Clamping Length - millimeter (LSC)5Clamping width - fractional inch (WSC)2.1Clamping width - inch0.0827CoatingBrightConnection diameter - inch (DCON MS)2.8EDP number137246Flute count (NOF)2Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973414Ordering code ANSIEP00M2.5Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Premachined hole diameter - inch (PHD)0.0827Premachined hole diameter - millimeter (PHD)2.1ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)2.5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0177Thread pitch - millimeter (TP)0.45Threading length - inch (THL)0.315Threading length - millimeter (THL)8Tolerance limitD3Usable length (ULDR)2.5Usable Length - inch (LU)0.4921Usable Length - millimeter (LU)12.5
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - fractional inch (WSC) | 2.1 |
| Clamping width - inch | 0.0827 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 2.8 |
| EDP number | 137246 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973414 |
| Ordering code ANSI | EP00M2.5 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Premachined hole diameter - inch (PHD) | 0.0827 |
| Premachined hole diameter - millimeter (PHD) | 2.1 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 2.5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0177 |
| Thread pitch - millimeter (TP) | 0.45 |
| Threading length - inch (THL) | 0.315 |
| Threading length - millimeter (THL) | 8 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.4921 |
| Usable Length - millimeter (LU) | 12.5 |
5973414
