Dormer C9088.0 5985704 Roughing End Mill 8.00 mm
- Write a review
$66.42
Basic StandardDIN 844 KCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cut lengthShortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)k12Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number76125Flute count (NOF)4Flute helix angle (FHA)35MaterialHSS-E-PMMID number5985704Mill ProfileNRA - Coarse Pitch Asymmetrical Rounded Profile ChipbreakerOrdering code ANSIC9088.0Overall length - inch (OAL)2.7165Overall length - millimeter (OAL)69Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | k12 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 76125 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 35 |
| Material | HSS-E-PM |
| MID number | 5985704 |
| Mill Profile | NRA - Coarse Pitch Asymmetrical Rounded Profile Chipbreaker |
| Ordering code ANSI | C9088.0 |
| Overall length - inch (OAL) | 2.7165 |
| Overall length - millimeter (OAL) | 69 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5985704
