Pramet LCMF 051608-F:T8330 6754310 Turning Insert - Parting And Grooving
- Write a review
$30.03
ChipbreakerFCoatingT8330Coating processPVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.031Corner radius - millimeter (RE)0.8Cutting depth maximum - inch (CDX)0.118Cutting depth maximum - millimeter (CDX)3Cutting depth minimum - millimeter (CDN)0.5Cutting width - inch (CW)0.197Cutting width - millimeter (CW)5Cutting width lower tolerance - inch (CWTOLL)-0.002Cutting width lower tolerance - millimeter (CWTOLL)-0.05Cutting width upper tolerance - inch (CWTOLU)0.002Cutting width upper tolerance - millimeter (CWTOLU)0.05Feed maximal - millimeter0.3Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.012Feed_MIN_IMP_NUM0.004Insert length - inch (INSL)0.646Insert length - millimeter (INSL)16.4Insert shape code (SC)L - rectangularISO_CuttingDepth_MIN_IMP_NUM0.02
Specifications
| Chipbreaker | F |
| Coating | T8330 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.031 |
| Corner radius - millimeter (RE) | 0.8 |
| Cutting depth maximum - inch (CDX) | 0.118 |
| Cutting depth maximum - millimeter (CDX) | 3 |
| Cutting depth minimum - millimeter (CDN) | 0.5 |
| Cutting width - inch (CW) | 0.197 |
| Cutting width - millimeter (CW) | 5 |
| Cutting width lower tolerance - inch (CWTOLL) | -0.002 |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.05 |
| Cutting width upper tolerance - inch (CWTOLU) | 0.002 |
| Cutting width upper tolerance - millimeter (CWTOLU) | 0.05 |
| Feed maximal - millimeter | 0.3 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.012 |
| Feed_MIN_IMP_NUM | 0.004 |
| Insert length - inch (INSL) | 0.646 |
| Insert length - millimeter (INSL) | 16.4 |
| Insert shape code (SC) | L - rectangular |
| ISO_CuttingDepth_MIN_IMP_NUM | 0.02 |
6754310
