Dormer S11312.0 7648619 Ball-Nosed End Mill 12.00 mm
- Write a review
$67.22
Basic StandardDORMERCoatingBrightConnection diameter - millimeter (DCON MS)12Corner radius - inch (RE)0.236Corner radius - millimeter (RE)6Cut lengthMediumCutting diameter - inch (DC)0.4724Cutting diameter - millimeter (DC)12Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - inch (APMX)0.9843Depth of cut maximum - millimeter (APMX)25EDP number7648619Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648619Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS11312.0Overall length - inch (OAL)2.9528Overall length - millimeter (OAL)75Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - millimeter (DCON MS) | 12 |
| Corner radius - inch (RE) | 0.236 |
| Corner radius - millimeter (RE) | 6 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.4724 |
| Cutting diameter - millimeter (DC) | 12 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - inch (APMX) | 0.9843 |
| Depth of cut maximum - millimeter (APMX) | 25 |
| EDP number | 7648619 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648619 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S11312.0 |
| Overall length - inch (OAL) | 2.9528 |
| Overall length - millimeter (OAL) | 75 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648619
