Pramet LNMX 501432E:T9335 6754915 Turning Insert - Heavy Duty And Railway
- Write a review
$116.34
ChipbreakerNo chipbreakerCoatingT9335Coating processMT-CVDCoating property (CTP)1Cooling effectVery positive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.126Corner radius - millimeter (RE)3.2Cutting edge length - inch (L)2Cutting edge length - millimeter (L)50.8Depth of cut maximum - inch (APMX)1.417Depth of cut maximum - millimeter (APMX)36Depth of cut minimum - inch (APMN)0.394Depth of cut minimum - millimeter (APMN)10Feed maximal - millimeter2.6Feed minimal - millimeter1.5Feed_MAX_IMP_NUM0.102Feed_MIN_IMP_NUM0.059Fixing hole diameter - inch (D1)0.25Fixing hole diameter - millimeter (D1)6.35Insert shape code (SC)L - rectangularInsert thickness - inch (S)0.551Insert thickness - millimeter (S)14Insert width - inch (W1)1Insert width - millimeter (W1)25.4
Specifications
| Chipbreaker | No chipbreaker |
| Coating | T9335 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.126 |
| Corner radius - millimeter (RE) | 3.2 |
| Cutting edge length - inch (L) | 2 |
| Cutting edge length - millimeter (L) | 50.8 |
| Depth of cut maximum - inch (APMX) | 1.417 |
| Depth of cut maximum - millimeter (APMX) | 36 |
| Depth of cut minimum - inch (APMN) | 0.394 |
| Depth of cut minimum - millimeter (APMN) | 10 |
| Feed maximal - millimeter | 2.6 |
| Feed minimal - millimeter | 1.5 |
| Feed_MAX_IMP_NUM | 0.102 |
| Feed_MIN_IMP_NUM | 0.059 |
| Fixing hole diameter - inch (D1) | 0.25 |
| Fixing hole diameter - millimeter (D1) | 6.35 |
| Insert shape code (SC) | L - rectangular |
| Insert thickness - inch (S) | 0.551 |
| Insert thickness - millimeter (S) | 14 |
| Insert width - inch (W1) | 1 |
| Insert width - millimeter (W1) | 25.4 |
6754915
