Dormer E765M12X1.5 7350506 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 3FL M12 x 1.50 mm
- Write a review
$42.30
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)11Clamping width - inch0.273CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.367Connection diameter - millimeter (DCON MS)9.32EDP number7350506Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350506Ordering code ANSIE765M12X1.5Overall length - inch (OAL)3.937Overall length - millimeter (OAL)0.367Premachined hole diameter - imperial (PHD)ZPremachined hole diameter - inch (PHD)0.4134Premachined hole diameter - millimeter (PHD)10.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)ZThread diameter size (TDZ)12Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.8268Threading length - millimeter (THL)21Tolerance limitD6Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - inch | 0.273 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.367 |
| Connection diameter - millimeter (DCON MS) | 9.32 |
| EDP number | 7350506 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350506 |
| Ordering code ANSI | E765M12X1.5 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 0.367 |
| Premachined hole diameter - imperial (PHD) | Z |
| Premachined hole diameter - inch (PHD) | 0.4134 |
| Premachined hole diameter - millimeter (PHD) | 10.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | Z |
| Thread diameter size (TDZ) | 12 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.8268 |
| Threading length - millimeter (THL) | 21 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
7350506