Dormer A218N2 5969045 120° Centre Drill - 90° Short ANSI N2
- Write a review
$6.13
ApplicationAngleIcon_DICT_SELCenter drilling 90°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)3/16Connection diameter - inch (DCON MS)0.1875Connection diameter - millimeter (DCON MS)4.76Cutting diameter - inch (DC)0.0781Cutting diameter - millimeter (DC)1.98EDP number239308Hand (Cutting direction)RightInternal designation number2Length chip flute - fractional inch (LCF)33/64Length chip flute - inch (LCF)0.5156MaterialHSSMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969045Ordering code ANSIA218N2Overall length - fractional inch (OAL)1.7/8Overall length - millimeter (OAL)47.63Point Angle (SIG)120ShankCylindrical shankStep included angle (STA)90Usable length (ULDR)1
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 90° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/16 |
| Connection diameter - inch (DCON MS) | 0.1875 |
| Connection diameter - millimeter (DCON MS) | 4.76 |
| Cutting diameter - inch (DC) | 0.0781 |
| Cutting diameter - millimeter (DC) | 1.98 |
| EDP number | 239308 |
| Hand (Cutting direction) | Right |
| Internal designation number | 2 |
| Length chip flute - fractional inch (LCF) | 33/64 |
| Length chip flute - inch (LCF) | 0.5156 |
| Material | HSS |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969045 |
| Ordering code ANSI | A218N2 |
| Overall length - fractional inch (OAL) | 1.7/8 |
| Overall length - millimeter (OAL) | 47.63 |
| Point Angle (SIG) | 120 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 90 |
| Usable length (ULDR) | 1 |
5969045
