Dormer E0717/8NO6 5974194 Hand Tap Straight Flute UNF 7/8 inch x 14
- Write a review
$162.37
Basic StandardANSIClamping width - fractional inch (WSC)0.697Clamping width - inch0.523CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)4.11/16Connection diameter - millimeter (DCON MS)17.7EDP number349922Flute count (NOF)20.4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5974194Ordering code ANSIE0717/8NO6Overall length - fractional inch (OAL)4.11/16Overall length - inch (OAL)4.6875Overall length - millimeter (OAL)119.06Premachined hole diameter - inch (PHD)0.8031Premachined hole diameter - millimeter (PHD)13/16ShankCylindrical shank with SquareThread diameter size (TDZ)7/8Thread form (THFT)UNF - Unified FineThreading length - inch (THL)1.1811Threads per inch (TPI)14Tolerance limitH4Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 0.697 |
| Clamping width - inch | 0.523 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 4.11/16 |
| Connection diameter - millimeter (DCON MS) | 17.7 |
| EDP number | 349922 |
| Flute count (NOF) | 20.4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5974194 |
| Ordering code ANSI | E0717/8NO6 |
| Overall length - fractional inch (OAL) | 4.11/16 |
| Overall length - inch (OAL) | 4.6875 |
| Overall length - millimeter (OAL) | 119.06 |
| Premachined hole diameter - inch (PHD) | 0.8031 |
| Premachined hole diameter - millimeter (PHD) | 13/16 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 7/8 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 1.1811 |
| Threads per inch (TPI) | 14 |
| Tolerance limit | H4 |
| Usable length (ULDR) | 1.5 |
5974194
