Dormer S722HB20.0 8030361 End Mill
- Write a review
$417.75
Basic StandardDORMERCoatingAlCrNConnection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Corner radius - inch (RE)0.0079Corner radius - millimeter (RE)0.2Cut lengthMediumCutting diameter - inch (DC)0.7874Cutting diameter - millimeter (DC)20Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)1.4961Depth of cut maximum - millimeter (APMX)38EDP number8030361Flute count (NOF)4Flute helix angle (FHA)40Material applicationK - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMaterial code (BMC)HMMID number8030361Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.748Neck diameter - millimeter (DN)19Ordering code ANSIS722HB20.0Overall length - inch (OAL)4.0945Overall length - millimeter (OAL)104Radial rake angle (GAMF)7ShankCylindrical shank DIN 6535 HBUsable Length - millimeter (LU)50
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Corner radius - inch (RE) | 0.0079 |
| Corner radius - millimeter (RE) | 0.2 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.7874 |
| Cutting diameter - millimeter (DC) | 20 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 1.4961 |
| Depth of cut maximum - millimeter (APMX) | 38 |
| EDP number | 8030361 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| Material code (BMC) | HM |
| MID number | 8030361 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.748 |
| Neck diameter - millimeter (DN) | 19 |
| Ordering code ANSI | S722HB20.0 |
| Overall length - inch (OAL) | 4.0945 |
| Overall length - millimeter (OAL) | 104 |
| Radial rake angle (GAMF) | 7 |
| Shank | Cylindrical shank DIN 6535 HB |
| Usable Length - millimeter (LU) | 50 |
8030361
