Dormer S9447.0 5982925 End Mill 7.00 mm
- Write a review
$67.29
Basic StandardDORMERCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner chamfer width - millimeter (CHW)0.13Cut lengthMediumCutting diameter - inch (DC)0.2756Cutting diameter - millimeter (DC)7Cutting diameter tolerance class (TCDC)h12Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number40270Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5982925Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS9447.0Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HB
Specifications
| Basic Standard | DORMER |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner chamfer width - millimeter (CHW) | 0.13 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.2756 |
| Cutting diameter - millimeter (DC) | 7 |
| Cutting diameter tolerance class (TCDC) | h12 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 40270 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5982925 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S9447.0 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HB |
5982925
