Pramet PPH-08/02-QC12-110HSCW 7024731 End Milling Cutter - Copy And Profile
- Write a review
$532.62
Body diameter - inch (BD)0.256Body diameter - millimeter (BD)6.5Body length - millimeter (LB)19Carbide_FLAG1Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.472Connection diameter - millimeter (DCON MS)12Cutting diameter maximum - inch (DCX)0.315Cutting diameter maximum - millimeter (DCX)8Insert group used in the toolPPH 08Insert index count (NOI)1Overall length - inch (OAL)4.331Overall length - millimeter (OAL)110Possible useFinishingPrimary useRoughingRotational speed maximum (RPMX)40000ShankCylindrical shank DIN 1835AUsable Length - millimeter (LU)53Usable Length maximum - millimeter (LUX)30.1
Specifications
| Body diameter - inch (BD) | 0.256 |
| Body diameter - millimeter (BD) | 6.5 |
| Body length - millimeter (LB) | 19 |
| Carbide_FLAG | 1 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.472 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Cutting diameter maximum - inch (DCX) | 0.315 |
| Cutting diameter maximum - millimeter (DCX) | 8 |
| Insert group used in the tool | PPH 08 |
| Insert index count (NOI) | 1 |
| Overall length - inch (OAL) | 4.331 |
| Overall length - millimeter (OAL) | 110 |
| Possible use | Finishing |
| Primary use | Roughing |
| Rotational speed maximum (RPMX) | 40000 |
| Shank | Cylindrical shank DIN 1835A |
| Usable Length - millimeter (LU) | 53 |
| Usable Length maximum - millimeter (LUX) | 30.1 |
7024731
