Dormer S1087/16 7648538 End Mill 2FL 7/16 inch
- Write a review
$40.67
Basic StandardDORMER"CoatingBrightConnection diameter - fractional inch (DCON MS)7/16Connection diameter - inch (DCON MS)0.4375Connection diameter - millimeter (DCON MS)11.11Cut lengthMediumCutting diameter - fractional inch (DC)7/16Cutting diameter - inch (DC)0.4375Cutting diameter - millimeter (DC)11.11Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1EDP number7648538Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steelMID number7648538Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1087/16Overall length - fractional inch (OAL)2.1/2Overall length - inch (OAL)2.5Overall length - millimeter (OAL)63.5Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER" |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 7/16 |
| Connection diameter - inch (DCON MS) | 0.4375 |
| Connection diameter - millimeter (DCON MS) | 11.11 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 7/16 |
| Cutting diameter - inch (DC) | 0.4375 |
| Cutting diameter - millimeter (DC) | 11.11 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1 |
| EDP number | 7648538 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648538 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1087/16 |
| Overall length - fractional inch (OAL) | 2.1/2 |
| Overall length - inch (OAL) | 2.5 |
| Overall length - millimeter (OAL) | 63.5 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648538
