Dormer E500M1.6NO6 5976990 Machine Tap Straight Flute 2FL M1.6 x 0.35 mm
- Write a review
$90.95
Basic StandardISO 529Clamping Length - millimeter (LSC)4Clamping width - inch0.0787Clamping width - millimeter (WSC)2.5CoatingBrightCoating property (CTP)2Connection diameter - inch (DCON MS)0.0984Connection diameter - millimeter (DCON MS)41Coolant supply property (CSP)2EDP number155028Flute count (NOF)1.25Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976990Ordering code ANSIE500M1.6NO6Overall length - inch (OAL)1.6142Overall length - millimeter (OAL)8Premachined hole diameter - inch (PHD)0.0492Premachined hole diameter - millimeter (PHD)1.25ShankCylindrical shank with SquareThread diameter size (TDZ)1.6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0138Thread pitch - millimeter (TP)0.35Threading length - inch (THL)0.315Threading length - millimeter (THL)8Usable length (ULDR)1.5Usable Length - inch (LU)0.315Usable Length - millimeter (LU)8
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 4 |
| Clamping width - inch | 0.0787 |
| Clamping width - millimeter (WSC) | 2.5 |
| Coating | Bright |
| Coating property (CTP) | 2 |
| Connection diameter - inch (DCON MS) | 0.0984 |
| Connection diameter - millimeter (DCON MS) | 41 |
| Coolant supply property (CSP) | 2 |
| EDP number | 155028 |
| Flute count (NOF) | 1.25 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976990 |
| Ordering code ANSI | E500M1.6NO6 |
| Overall length - inch (OAL) | 1.6142 |
| Overall length - millimeter (OAL) | 8 |
| Premachined hole diameter - inch (PHD) | 0.0492 |
| Premachined hole diameter - millimeter (PHD) | 1.25 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 1.6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0138 |
| Thread pitch - millimeter (TP) | 0.35 |
| Threading length - inch (THL) | 0.315 |
| Threading length - millimeter (THL) | 8 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.315 |
| Usable Length - millimeter (LU) | 8 |
5976990
