Dormer E5473/8NO7 5976419 G(BSP) Machine Tap Straight Flute 4FL 3/8 inch x 19
- Write a review
$121.94
Basic StandardISO 2284Clamping Length - millimeter (LSC)13Clamping width - inch0.3937Clamping width - millimeter (WSC)12.5CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)0.4921Connection diameter - millimeter (DCON MS)75Coolant supply property (CSP)10EDP number157244Flute count (NOF)15.25Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976419Ordering code ANSIE5473/8NO7Overall length - inch (OAL)2.9528Overall length - millimeter (OAL)75Premachined hole diameter - inch (PHD)0.6004Premachined hole diameter - millimeter (PHD)15.25ShankCylindrical shank with SquareThread diameter - inch (TD)0.656Thread diameter - millimeter (TD)16.662Thread diameter size (TDZ)3/8Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.8268Threading length - millimeter (THL)21Threads per inch (TPI)19Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 13 |
| Clamping width - inch | 0.3937 |
| Clamping width - millimeter (WSC) | 12.5 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 0.4921 |
| Connection diameter - millimeter (DCON MS) | 75 |
| Coolant supply property (CSP) | 10 |
| EDP number | 157244 |
| Flute count (NOF) | 15.25 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976419 |
| Ordering code ANSI | E5473/8NO7 |
| Overall length - inch (OAL) | 2.9528 |
| Overall length - millimeter (OAL) | 75 |
| Premachined hole diameter - inch (PHD) | 0.6004 |
| Premachined hole diameter - millimeter (PHD) | 15.25 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.656 |
| Thread diameter - millimeter (TD) | 16.662 |
| Thread diameter size (TDZ) | 3/8 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.8268 |
| Threading length - millimeter (THL) | 21 |
| Threads per inch (TPI) | 19 |
| Usable length (ULDR) | 1.5 |
5976419
