Pramet SNMG 544-R:T9325 6754020 Turning Insert - Negative
- Write a review
$16.80
ChipbreakerRCoatingT9325Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.063Corner radius - millimeter (RE)1.6Cutting edge length - inch (L)0.625Cutting edge length - millimeter (L)15.875Depth of cut maximum - inch (APMX)0.276Depth of cut maximum - millimeter (APMX)7Depth of cut minimum - inch (APMN)0.079Depth of cut minimum - millimeter (APMN)2Feed maximal - millimeter0.7Feed minimal - millimeter0.25Feed_MAX_IMP_NUM0.028Feed_MIN_IMP_NUM0.01Fixing hole diameter - inch (D1)0.25Fixing hole diameter - millimeter (D1)6.35Inscribed circle diameter - inch (IC)0.625Inscribed circle diameter - millimeter (IC)15.875Insert thickness - millimeter (S)6.35
Specifications
| Chipbreaker | R |
| Coating | T9325 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.063 |
| Corner radius - millimeter (RE) | 1.6 |
| Cutting edge length - inch (L) | 0.625 |
| Cutting edge length - millimeter (L) | 15.875 |
| Depth of cut maximum - inch (APMX) | 0.276 |
| Depth of cut maximum - millimeter (APMX) | 7 |
| Depth of cut minimum - inch (APMN) | 0.079 |
| Depth of cut minimum - millimeter (APMN) | 2 |
| Feed maximal - millimeter | 0.7 |
| Feed minimal - millimeter | 0.25 |
| Feed_MAX_IMP_NUM | 0.028 |
| Feed_MIN_IMP_NUM | 0.01 |
| Fixing hole diameter - inch (D1) | 0.25 |
| Fixing hole diameter - millimeter (D1) | 6.35 |
| Inscribed circle diameter - inch (IC) | 0.625 |
| Inscribed circle diameter - millimeter (IC) | 15.875 |
| Insert thickness - millimeter (S) | 6.35 |
