Dormer E5471/8NO7 5976353 G(BSP) Machine Tap Straight Flute 4FL 1/8 inch x 28
- Write a review
$78.30
Basic StandardISO 2284Clamping Length - millimeter (LSC)9Clamping width - inch0.248Clamping width - millimeter (WSC)8CoatingBrightCoating property (CTP)4Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)59Coolant supply property (CSP)6.3EDP number157183Flute count (NOF)8.8Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976353Ordering code ANSIE5471/8NO7Overall length - inch (OAL)2.3228Overall length - millimeter (OAL)59Premachined hole diameter - inch (PHD)0.3465Premachined hole diameter - millimeter (PHD)8.8ShankCylindrical shank with SquareThread diameter - inch (TD)0.383Thread diameter - millimeter (TD)9.728Thread diameter size (TDZ)1/8Thread form (THFT)G - British standard pipe fastening - G seriesThreading length - inch (THL)0.5906Threading length - millimeter (THL)15Threads per inch (TPI)28Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 2284 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - inch | 0.248 |
| Clamping width - millimeter (WSC) | 8 |
| Coating | Bright |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 59 |
| Coolant supply property (CSP) | 6.3 |
| EDP number | 157183 |
| Flute count (NOF) | 8.8 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976353 |
| Ordering code ANSI | E5471/8NO7 |
| Overall length - inch (OAL) | 2.3228 |
| Overall length - millimeter (OAL) | 59 |
| Premachined hole diameter - inch (PHD) | 0.3465 |
| Premachined hole diameter - millimeter (PHD) | 8.8 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.383 |
| Thread diameter - millimeter (TD) | 9.728 |
| Thread diameter size (TDZ) | 1/8 |
| Thread form (THFT) | G - British standard pipe fastening - G series |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Threads per inch (TPI) | 28 |
| Usable length (ULDR) | 1.5 |
5976353
