Pramet RDMT 120500SN-R:M9340 7342905 Milling Insert - Copy and Profile
- Write a review
$12.00
ChipbreakerRCoatingM9340Coating processMT-CVDCoating property (CTP)1Cooling effectVery negative effect on tool life - cooling is not recommendedDepth of cut maximum - inch (APMX)0.236Depth of cut maximum - millimeter (APMX)6Depth of cut minimum - inch (APMN)0.012Depth of cut minimum - millimeter (APMN)0.3Feed maximal - millimeter0.34Feed minimal - millimeter0.17Feed_MAX_IMP_NUM0.013Feed_MIN_IMP_NUM0.007Fixing hole diameter - inch (D1)0.217Fixing hole diameter - millimeter (D1)5.5Insert diameter - inch (INSD)0.5Insert diameter - millimeter (INSD)12.7Insert thickness - inch (S)0.219Insert thickness - millimeter (S)5.56
Specifications
| Chipbreaker | R |
| Coating | M9340 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Very negative effect on tool life - cooling is not recommended |
| Depth of cut maximum - inch (APMX) | 0.236 |
| Depth of cut maximum - millimeter (APMX) | 6 |
| Depth of cut minimum - inch (APMN) | 0.012 |
| Depth of cut minimum - millimeter (APMN) | 0.3 |
| Feed maximal - millimeter | 0.34 |
| Feed minimal - millimeter | 0.17 |
| Feed_MAX_IMP_NUM | 0.013 |
| Feed_MIN_IMP_NUM | 0.007 |
| Fixing hole diameter - inch (D1) | 0.217 |
| Fixing hole diameter - millimeter (D1) | 5.5 |
| Insert diameter - inch (INSD) | 0.5 |
| Insert diameter - millimeter (INSD) | 12.7 |
| Insert thickness - inch (S) | 0.219 |
| Insert thickness - millimeter (S) | 5.56 |
RDMT 120500SN-R:M9340
